The Oregon daily journal., November 01, 1908, Page 61, Image 61

Pattern and Design Transfer Sect son
November i , 190s
The New Transfer Patterns
BABY'S OUTFIT
Tins set is embroidered in the French underlaid and eyelet
work. The Bib (No. 1) is made of a heavy quality of hand
kerchief linen and is Jx be worn over a quilted pad. The edge is
scalloped and, for a dresSy effect, narrow lace is gathered on
beneath the scallop. -
Dress yoke (No. 2) is made of French nainsook, lawn or
any suitable sheer material. The yoke is joined to the dress with
featherstitching or narrow beading. Edge of the neck is finished
witjh beading or lace ruffle. .
Cap (No. 3) is made of sheer linen and is worn over a
colored silk slip, or it may be made of silk or pique. Sew the
back together, gather the cap between the notches, then blind
stitch this arounJ the crown (No. 4). Hem theties, gather, and.
sew at each end of the cap on, the scallop near the front No.
8 shows design for end of bonnet string. " A
Bootee ( No. 5) is made of pique, heavy linen or silk. Line
the soles and uppers with silk", sew the back of uppers, sew les
to the uppers, but leave the lining loose, then blindstit5 tb .
upper silk lining to the soles. The scallops and lining may be
scalloped together. Finish bootees with a ribbon bow across
the. top. No. 7 shows sole of bootee.
; The Spray design (No. 6) may be used on any baby gar
ment .
(Patents Pending)
Directions
Lay the design you wish to transfer face downward, on any flat
surface, and dampen the back with water until fne outlines of the de
sigTushow clearly through the paper. A wet cloth will serve the pur
pose of dampening, but a small sponge is better. Spread the material
on which you wish to transfer the design on the table or on any
smoothhard surface; lay the dampened design, still face downward,
on the material, cover it with a dry sheet of thick paper or several
folds of a newspaper, and rub with a slight pressure, using a handker
chief or dry cloth, until the design- is entirely transferred. During (he
rubbing you may readily see whether enough pressure is being applied
by lifting a corner or end of the design and noting how it is taking.
The whole process is very simple and, after a trial or two, you
should be able to make a perfect transfer to any kind of goods. Do
not wet the transfer sheet too much. Do not wef the material, and do
not rub the face of the design with wet or damp fingers.
Several transfers may be made from the same design, it being only
necessary to redampen the back of the design sheet for each additional
transfer. The design may be readily removed from the material by
washing the material in warm water and a little soap.. The ink .with
which the transfers are printed is absohitely harmless, and will not in
jure the finest fabric.
Cover or cut out letters in making the transfers to goods.
Copyright, nffoX If. H. McClurt & Co.)